Showing 1–24 of 87 results

Show sidebar

BUSHRANGER 72V BATTERY POWERED 30″ RIDE ON MOWER

$4,499.00
  • Powerful 72V brushless motor.
  • 72V Lithium 18.0 Ah Samsung battery.
  • Battery status indicator.
  • 30” cut.
  • Height Adjuster.
  • Environmentally friendly.
  • Side discharge or use with mulch plug (included).
  • Low Maintenance.
  • Extremely quiet.
  • Mulch plug.
  • Cup holder.
  • LED front lights.
  • Cruise control.
  • High back seat.
  • Mow in reverse function button.
  • Limp mode when battery is depleted.
  • Low battery beeper.

BUSHRANGER PROVAC SI 27″ WIDE PROFESSIONAL SERIES VACUUM

$3,699.00
  • Honda GSV190 engine provides long life and reliability.
  • 151 Litre (40 gallon) bag which is harness mounted on top and quick attaches on bottom.
  • 27" (68 cm) Vacuum width.
  • Integral dust skirt - keeps dust down and away from the operator.
  • Large 5-blade impeller with serrated edges - maximises both suction and debris reduction.
  • Variable height adjustment to accommodate hard surface or turf work.
  • 12" tyres make operation simple in all environments.
  • Optimised nozzle configuration improves suction and debris flow and handles hedge clippings with ease.
  • Optional wander hose kit (optional accessory please purchase separately).
  • Lightweight only 66.2 kg.
  • Made in USA.

BUSHRANGER CYLINDER MOWER

$2,949.00$3,149.00
AN IDEAL CYLINDER MOWER FOR PRECISION GROOMING OF FINE TURF.

BUSHRANGER CHIPPER

$2,199.00$2,999.00
THE BUSHRANGER® CHIPPER IS EASY TO USE, MANOEUVRE AND TRANSPORT - READY TO TAKE ON ANY JOB.

BUSHRANGER CYLINDER MOWER

$1,849.00$2,099.00
BUSHRANGER'S  CYLINDER MOWER WILL GIVE YOUR LAWN THE TLC IT NEEDS EVERY USE.

BUSHRANGER 53AH6IMSP, 800SP SERIES SELF-PROPELLED LAWN MOWER

$1,799.00
  • Honda GXV160 Engine.
  • 21" (530 mm) Cut.
  • 4 Swing back blades.
  • Mulching Plug.
  • Alloy chassis.
  • 70 Litre durable fabric grass catcher.
  • Self-Propelled, 3 speed gear box.
  • Drive control levers.
  • 8" (200mm) Front and rear wheels fitted with dual ball bearings.
  • Axle bolted to chassis.

BUSHRANGER EA451 EARTH AUGER

$1,499.00
  • Chrome Impregnated Cylinder: Bushranger® commercial handheld products feature chrome impregnated cylinders giving them a longer life than a standard engine.
  • High torque, high-powered state of the art 41.5 cc engine makes this earth auger a must for any digging operation.
  • Worm gear transmission.
  • Augers which are sold separately are available in 4", 6", 8" and 10".
  • Engine protection frame and handle system.
  • EPA3 compliant.
  • Made in Japan.

BUSHRANGER 48AH6IM, 800 SERIES MULCH & CATCH LAWN MOWER

$1,249.00
  • Honda GXV160 Engine.
  • 19" (480 mm) Cut.
  • 4 Swing back blades.
  • Mulching Plug.
  • Alloy chassis.
  • Grass catcher.
  • 8" (200mm) Front and rear wheels fitted with dual ball bearings.

BUSHRANGER AHT261 LONG REACH HEDGE TRIMMER

$1,199.00
  • Chrome Impregnated Cylinder: Bushranger® commercial handheld products feature chrome impregnated cylinders giving them a longer life than a standard engine.
  • Reverse Start: An assisted start system which only requires about one-third the effort of a conventional starter system when the rope is pulled.
  • Anti-Vibration System: This multi-tool has a high and low frequency vibration dampening system which significantly reduces operator fatigue.
  • Powerhead and front handle anti-vibration.
  • Solid Steel Shaft: Bushranger® drive shafts are precision manufactured from solid steel and polished for optimal performance. Also, durable bronze bushings reduce vibrations and power loss.
  • Tank guard.

BUSHRANGER 53THU6 UTILITY MOWER

$1,169.00
  • Honda GXV160 engine
  • 21" (533 mm) cut
  • 4 Swing back blades
  • Pressed steel chassis
  • Side discharge
  • 7.5" (190 mm) wheels fitted with double ball bearings
  • 12 position steel height adjuster
  • One-piece lower handle for strength and support

BUSHRANGER BCK45 STRAIGHT SHAFT BULL HANDLE BRUSHCUTTER

$1,059.00
  • Nikasil Coated Cylinder and twin ring piston for long engine life.
  • Four Bearing Gear Case: Bushranger® trimmers and brushcutters are manufactured with a four bearing gear case allowing them to run smoother and longer under commercial applications.
  • Anti-Vibration System: All Bushranger® brushcutters and trimmers run a high and low frequency vibration dampening system which significantly reduces operator fatigue.
  • Powerhead anti-vibration.
  • Solid Steel Shaft: Bushranger® drive shafts are precision manufactured from solid steel and polished for optimal performance. Also durable bronze bushings reduce vibrations and power loss.
  • High powered, light weight unit loaded with commercial features.
  • Bull handle.
  • Tank guard.
  • Commercial quality 5" easy load tap and go trimmer head.
  • Blade capable - 10" x 3 Tooth metal blade included.
  • Pro dual harness.
  • Made In Japan.

BUSHRANGER BCK35 STRAIGHT SHAFT BULL HANDLE BRUSHCUTTER

$999.00
  • Nikasil Coated Cylinder and twin ring piston for long engine life.
  • Four Bearing Gear Case: Bushranger® trimmers and brushcutters are manufactured with a four bearing gear case allowing them to run smoother and longer under commercial applications.
  • Anti-Vibration System: All Bushranger® brushcutters and trimmers run a high and low frequency vibration dampening system which significantly reduces operator fatigue.
  • Powerhead anti-vibration.
  • Solid Steel Shaft: Bushranger® drive shafts are precision manufactured from solid steel and polished for optimal performance. Also durable bronze bushings reduce vibrations and power loss.
  • High powered, light weight unit loaded with commercial features.
  • Bull handle.
  • Tank guard.
  • Commercial quality 5" easy load tap and go trimmer head.
  • Blade capable - 10" x 3 Tooth metal blade included.
  • Pro dual harness.
  • Made In Japan.

BUSHRANGER BC451 STRAIGHT SHAFT BULL HANDLE BRUSHCUTTER

$999.00
  • Chrome Impregnated Cylinder: Bushranger® commercial handheld products feature chrome impregnated cylinders giving them a longer life than a standard engine.
  • Four Bearing Gear Case: Bushranger® trimmers and brushcutters are manufactured with a four-bearing gear case allowing them to run smoother and longer under commercial applications.
  • Anti-Vibration System: All Bushranger® brushcutters and trimmers run a high and low frequency vibration dampening system which significantly reduces operator fatigue.
  • Powerhead anti-vibration.
  • Solid Steel Shaft: Bushranger® drive shafts are precision manufactured from solid steel and polished for optimal performance. Also, durable bronze bushings reduce vibrations and power loss.
  • A brushcutter that delivers exceptional performance no matter what your cutting needs are.
  • Heavy duty clutch.
  • Tank guard.
  • Commercial quality 5" easy load tap and go trimmer head.
  • Blade capable - 10" x 4 Tooth metal blade included.
  • EPA3 compliant.
  • Pro dual harness.
  • Made in Japan.

BUSHRANGER HTS261 HEDGE TRIMMER

$989.00
  • Chrome Impregnated Cylinder: Bushranger® commercial handheld products feature chrome impregnated cylinders giving them a longer life than a standard engine.
  • Reverse Start: An assisted start system which only requires about one-third the effort of a conventional starter system when the rope is pulled.
  • Light weight.
  • High blade speed.
  • 40" (1016 mm) Single sided blade.
  • The induction hardened chrome steel blades are polish ground sharpened on all three cutting surfaces for a cleaner cut.
  • Designed for the commercial operator.
  • Bushranger® blade connecting rods are twice as thick and manufactured from heavier gauge and higher quality steel than many other hedge trimmers on the market.
  • Maruyama clutches are manufactured from die cast Zamak with bonded fibrous linings for significantly reduced heat build-up and extremely long life.
  • Made in Japan.

BUSHRANGER L451 STRAIGHT SHAFT LOOP HANDLE TRIMMER

$979.00
  • Chrome Impregnated Cylinder: Bushranger® commercial handheld products feature chrome impregnated cylinders giving them a longer life than a standard engine.
  • Four Bearing Gear Case: Bushranger® trimmers and brushcutters are manufactured with a four-bearing gear case allowing them to run smoother and longer under commercial applications.
  • Anti-Vibration System: All Bushranger® brushcutters and trimmers run a high and low frequency vibration dampening system which significantly reduces operator fatigue.
  • Powerhead and front handle anti-vibration.
  • Solid Steel Shaft: Bushranger® drive shafts are precision manufactured from solid steel and polished for optimal performance. Also, durable bronze bushings reduce vibrations and power loss.
  • A high performing, high powered trimmer built to handle any commercial job.
  • Heavy duty clutch.
  • Tank guard.
  • Commercial quality 5" easy load tap and go trimmer head.
  • Single shoulder strap harness.
  • EPA3 compliant.
  • Blade capable.
  • Made in Japan.

BUSHRANGER BC361 STRAIGHT SHAFT BULL HANDLE BRUSHCUTTER

$949.00
  • Two stroke engine, 35.5 cc (1.4 kW).
  • Chrome impregnated cylinder liner.
  • Large fuel tank.
  • Handle type – Double.
  • Harness hook.
  • Fuel tank guard.
  • Commercial quality nylon head: M-Twist 4”.
  • Drive shaft: Solid 8 mm steel shaft, precision manufactured for optimal performance.
  • Drive Shaft length: 1544 mm.
  • Drive shaft bushing: 5.
  • Shaft outer diameter: 26 mm aluminium.
  • Made in Japan.

BUSHRANGER L361 STRAIGHT SHAFT LOOP HANDLE TRIMMER

$949.00
  • Two stroke engine, 35.5 cc (1.4 kW).
  • Chrome impregnated cylinder liner.
  • Loop type handle.
  • Harness hook.
  • Fuel tank guard.
  • Nylon head: M-Twist 4”.
  • Drive shaft: solid 8 mm.
  • Drive Shaft length: 1544 mm.
  • Drive shaft bushing: 5.
  • Shaft outer diameter: 26 mm aluminium.
  • Made in Japan.

BUSHRANGER 36V MULTI-TOOL

$339.00$939.00
THE SWISS ARMY KNIFE OF OUTDOOR POWER EQUIPMENT, THE 36V MULTI-TOOL TACKLES ALL OF YOUR GARDENING.

BUSHRANGER L361 STRAIGHT SHAFT LOOP HANDLE TRIMMER

$899.00
Power through the undergrowth or trim along a pathway, This BUSHRANGER loop handle trimmer can do it all. Lightweight, powerful and ergonomically designed, this trimmer which is made in Japan has quality written all over it. From the powerful 35.5 cc 2-stroke engine which has a chrome impregnated cylinder liner and is designed for higher performance, higher torque, low and clean exhaust emissions, low noise and low running costs. To the solid steel drive shaft, tank guard and anti-vibration front handle this heavy-duty machine is waiting for work.

BUSHRANGER BC301 STRAIGHT SHAFT BULL HANDLE BRUSHCUTTER

$899.00
  • Chrome Impregnated Cylinder: Bushranger commercial handheld products feature chrome impregnated cylinders giving them a longer life than a standard engine.
  • Four Bearing Gear Case: Bushranger trimmers and brushcutters are manufactured with a four-bearing gear case allowing them to run smoother and longer under commercial applications.
  • Anti-Vibration System: All Bushranger brushcutters and trimmers run a high and low frequency vibration dampening system which significantly reduces operator fatigue.
  • Powerhead anti-vibration.
  • Solid Steel Shaft: Bushranger drive shafts are precision manufactured from solid steel and polished for optimal performance. Also, durable bronze bushings reduce vibrations and power loss.
  • A brushcutter that delivers exceptional performance no matter what your cutting needs are.
  • Commercial quality 4" easy load tap and go trimmer head.
  • Blade capable - 10" x 4 Tooth metal blade included.
  • Pro dual harness.
  • EPA3 compliant.
  • Tank guard.
  • Made in Japan.

BUSHRANGER HT251 HEDGE TRIMMER

$889.00
  • Chrome Impregnated Cylinder: Bushranger® commercial handheld products feature chrome impregnated cylinders giving them a longer life than a standard engine.
  • Light weight.
  • Easy Start Mechanism.
  • High blade speed.
  • 30" (750 mm) Double sided blades.
  • Rotating rear handle.
  • Full anti-vibration system.
  • Commercial quality.
  • Made in Japan.

BUSHRANGER BCH35H STRAIGHT SHAFT BULL HANDLE BRUSHCUTTER

$879.00
  • Powered by a Honda Four Stroke Engine.
  • Four Bearing Gear Case: Bushranger® trimmers and brushcutters are manufactured with a four bearing gear case allowing them to run smoother and longer under commercial applications.
  • Anti-Vibration System: All Bushranger® brushcutters and trimmers run a high and low frequency vibration dampening system which significantly reduces operator fatigue.
  • Powerhead anti-vibration.
  • Solid Steel Shaft: Bushranger® drive shafts are precision manufactured from solid steel and polished for optimal performance. Also durable bronze bushings reduce vibrations and power loss.
  • High powered, light weight unit loaded with commercial features.
  • Commercial quality 5" easy load tap and go trimmer head.
  • Pro dual harness.
  • Bull handle.
  • Tank guard.
  • Blade capable - Metal blade included.
  • Made In Japan.

BUSHRANGEL301 STRAIGHT SHAFT LOOP HANDLE TRIMMERR

$839.00
  • Chrome Impregnated Cylinder: Bushranger® commercial handheld products feature chrome impregnated cylinders giving them a longer life than a standard engine.
  • Four Bearing Gear Case: Bushranger® trimmers and brushcutters are manufactured with a four-bearing gear case allowing them to run smoother and longer under commercial applications.
  • Anti-Vibration System: All Bushranger® brushcutters and trimmers run a high and low frequency vibration dampening system which significantly reduces operator fatigue.
  • Powerhead and front handle anti-vibration.
  • Solid Steel Shaft: Bushranger® drive shafts are precision manufactured from solid steel and polished for optimal performance. Also, durable bronze bushings reduce vibrations and power loss.
  • A well-balanced precision built professional trimmer, generating a high power to weight ratio.
  • Tank guard.
  • Commercial quality 4" easy load tap and go trimmer head.
  • Single shoulder strap harness.
  • EPA3 compliant.
  • Blade capable.
  • Made in Japan.