The BCZ3050SW features a Strato-Charged 2-stroke engine that produces ultra-low emissions with high power output. Its 29.5 cc, 1.04 kilowatt engine is combined with a die-cast aluminium housing for maximum heat dissipation for a longer life. A solid steel drive shaft connects to a gearbox with zerk fittings, so it is easy to lubricate and maintain. The BCZ3050SW has a vibration-reduction system built into the fan housing to reduce operator fatigue and allow you to work longer. Bull handles with throttle control improve ergonomics for the operator.
BUSHRANGER HTS261 HEDGE TRIMMER
- Chrome Impregnated Cylinder: Bushranger® commercial handheld products feature chrome impregnated cylinders giving them a longer life than a standard engine.
- Reverse Start: An assisted start system which only requires about one-third the effort of a conventional starter system when the rope is pulled.
- Light weight.
- High blade speed.
- 40" (1016 mm) Single sided blade.
- The induction hardened chrome steel blades are polish ground sharpened on all three cutting surfaces for a cleaner cut.
- Designed for the commercial operator.
- Bushranger® blade connecting rods are twice as thick and manufactured from heavier gauge and higher quality steel than many other hedge trimmers on the market.
- Maruyama clutches are manufactured from die cast Zamak with bonded fibrous linings for significantly reduced heat build-up and extremely long life.
- Made in Japan.
REDMAX EBZ6500RH BACKPACK BLOWER
A lightweight backpack blower designed for commercial use. With a 2.83 kilowatt engine and 373 km/h air speed, this machine has the air volume to move heavy debris and the speed to lift wet leaves and compacted sand. For added comfort and convenience, the EBZ6500RH is designed with a tube mounted throttle. The Strato-Charged engine reduces fuel consumption by up to 20% while providing more torque over a wider RPM range.
BUSHRANGER L451 STRAIGHT SHAFT LOOP HANDLE TRIMMER
- Chrome Impregnated Cylinder: Bushranger® commercial handheld products feature chrome impregnated cylinders giving them a longer life than a standard engine.
- Four Bearing Gear Case: Bushranger® trimmers and brushcutters are manufactured with a four-bearing gear case allowing them to run smoother and longer under commercial applications.
- Anti-Vibration System: All Bushranger® brushcutters and trimmers run a high and low frequency vibration dampening system which significantly reduces operator fatigue.
- Powerhead and front handle anti-vibration.
- Solid Steel Shaft: Bushranger® drive shafts are precision manufactured from solid steel and polished for optimal performance. Also, durable bronze bushings reduce vibrations and power loss.
- A high performing, high powered trimmer built to handle any commercial job.
- Heavy duty clutch.
- Tank guard.
- Commercial quality 5" easy load tap and go trimmer head.
- Single shoulder strap harness.
- EPA3 compliant.
- Blade capable.
- Made in Japan.
BUSHRANGER BC361 STRAIGHT SHAFT BULL HANDLE BRUSHCUTTER
- Two stroke engine, 35.5 cc (1.4 kW).
- Chrome impregnated cylinder liner.
- Large fuel tank.
- Handle type – Double.
- Harness hook.
- Fuel tank guard.
- Commercial quality nylon head: M-Twist 4”.
- Drive shaft: Solid 8 mm steel shaft, precision manufactured for optimal performance.
- Drive Shaft length: 1544 mm.
- Drive shaft bushing: 5.
- Shaft outer diameter: 26 mm aluminium.
- Made in Japan.
BUSHRANGER L361 STRAIGHT SHAFT LOOP HANDLE TRIMMER
- Two stroke engine, 35.5 cc (1.4 kW).
- Chrome impregnated cylinder liner.
- Loop type handle.
- Harness hook.
- Fuel tank guard.
- Nylon head: M-Twist 4”.
- Drive shaft: solid 8 mm.
- Drive Shaft length: 1544 mm.
- Drive shaft bushing: 5.
- Shaft outer diameter: 26 mm aluminium.
- Made in Japan.
BUSHRANGER 36V MULTI-TOOL
THE SWISS ARMY KNIFE OF OUTDOOR POWER EQUIPMENT, THE 36V MULTI-TOOL TACKLES ALL OF YOUR GARDENING.
BUSHRANGER L361 STRAIGHT SHAFT LOOP HANDLE TRIMMER
Power through the undergrowth or trim along a pathway, This BUSHRANGER loop handle trimmer can do it all. Lightweight, powerful and ergonomically designed, this trimmer which is made in Japan has quality written all over it. From the powerful 35.5 cc 2-stroke engine which has a chrome impregnated cylinder liner and is designed for higher performance, higher torque, low and clean exhaust emissions, low noise and low running costs. To the solid steel drive shaft, tank guard and anti-vibration front handle this heavy-duty machine is waiting for work.
BUSHRANGER BC301 STRAIGHT SHAFT BULL HANDLE BRUSHCUTTER
- Chrome Impregnated Cylinder: Bushranger commercial handheld products feature chrome impregnated cylinders giving them a longer life than a standard engine.
- Four Bearing Gear Case: Bushranger trimmers and brushcutters are manufactured with a four-bearing gear case allowing them to run smoother and longer under commercial applications.
- Anti-Vibration System: All Bushranger brushcutters and trimmers run a high and low frequency vibration dampening system which significantly reduces operator fatigue.
- Powerhead anti-vibration.
- Solid Steel Shaft: Bushranger drive shafts are precision manufactured from solid steel and polished for optimal performance. Also, durable bronze bushings reduce vibrations and power loss.
- A brushcutter that delivers exceptional performance no matter what your cutting needs are.
- Commercial quality 4" easy load tap and go trimmer head.
- Blade capable - 10" x 4 Tooth metal blade included.
- Pro dual harness.
- EPA3 compliant.
- Tank guard.
- Made in Japan.
REDMAX CHTZ2460L HEDGE TRIMMER
The CHTZ2460L is a popular model for professionals looking for a durable hedge trimmer. A Strato-Charged engine with ultra-low emissions powers a 30″ long case-hardened, dual steel blade. Steel-needle sealed bearings on the blade connecting rods extend the life of the CHTZ2460L and enhance performance. A vibration-dampening system on the rear handle reduces operator fatigue. An adjustable, three position rear handle can quickly be put into the position best suited for the task at hand.
BUSHRANGER HT251 HEDGE TRIMMER
- Chrome Impregnated Cylinder: Bushranger® commercial handheld products feature chrome impregnated cylinders giving them a longer life than a standard engine.
- Light weight.
- Easy Start Mechanism.
- High blade speed.
- 30" (750 mm) Double sided blades.
- Rotating rear handle.
- Full anti-vibration system.
- Commercial quality.
- Made in Japan.
BUSHRANGER BCH35H STRAIGHT SHAFT BULL HANDLE BRUSHCUTTER
- Powered by a Honda Four Stroke Engine.
- Four Bearing Gear Case: Bushranger® trimmers and brushcutters are manufactured with a four bearing gear case allowing them to run smoother and longer under commercial applications.
- Anti-Vibration System: All Bushranger® brushcutters and trimmers run a high and low frequency vibration dampening system which significantly reduces operator fatigue.
- Powerhead anti-vibration.
- Solid Steel Shaft: Bushranger® drive shafts are precision manufactured from solid steel and polished for optimal performance. Also durable bronze bushings reduce vibrations and power loss.
- High powered, light weight unit loaded with commercial features.
- Commercial quality 5" easy load tap and go trimmer head.
- Pro dual harness.
- Bull handle.
- Tank guard.
- Blade capable - Metal blade included.
- Made In Japan.
